Protective Coating

POLYUREA

Monneli Ureaprime IC

Inter-Coat Adhesion Promoter

Uses
Inter-coat adhesion promoter over polyurea prior to subsequest applications.
Used to enhance adhesion to a variety of substrate prior to adhesive application.
back to Protective Coating
Technical Information
Product Description

UREAPRIME IC is a single component low viscosity room temperature curing primer / adhesive. It enhances adhesion to a variety of substrates.

Advantages
  • Easy to mix and apply
  • Cost effective
Packaging, Coverage / Consumption

1 Liter, 4 Liter and 19 Liter pails.

Shelf Life & Storage

Keep the product in a dry covered place into original well closed packaging at 21ºC to 27ºC In these conditions the product will have a shelf life of 6 months from date of production.

UREAPRIME IC contains chemically active materials which will react with water, alcohol, amines and other compounds. After each use , cap container with dry air or nitrogen.

Technical Properties
Apperance

Liquid

Color

Purple

Density at 25ºC

1.35 kg/L

Viscosity at 25ºC

20 cps

Flash Point

93 ºC

Application Information
Instructions for use

Mixing

It is extremely important to first dilute UREAPRIME IC to a 1:1 ratio with acetone.

Application

UREAPRIME IC can be applied by spray, wipe, dip or brush method. If relative humidity falls below 50% or if temperature falls below 24°C, a longer dry time will be needed

Curing

UREAPRIME IC will air dry in less than two minutes.

Surface Preparation

All surfaces must be sound, clean, compact, free from dust, grease substances and other contaminants.

Additional Information
Health & Safety

During application, wear appropriate protective clothing, goggles, gloves and respiratory equipment if necessary.

 

In case of contact with skin, rinse with water and again wash thoroughly with soap and water.In case of contact with eyes, rinse with plenty of water and seek medical advice accordingly.

 

If ingested, obtain medical attention immediately. Do not induce vomiting.

Important note

The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updated on regular basis. It is the user’s responsibility to obtain the latest version.

additional materials
Fast Download
Technical Properties Sheet
download (*.pdf 0.11Mb)
OTHER PRODUCTS
More Products from this section
Monneli Armaturea A1

Aromatic Pure Polyurea

Monneli Armaturea A2

Advanced Formula Aromatic Pure Polyurea

Monneli Armaturea AL

Polyurethane Top Coat (Thin Film) UV Stable

Monneli Armaturea BG

Brush Grade Polyurea

Monneli Armaturea PA

Polyaspartic Polyurea Topcoat

view more
RANDOM PRODUCT
Monneli Insuwrap PVC 2500 TNL

2.5mm thick PVC Membrane for Underground Structures & Tanking System

Uses
Waterproofing of basements, tunnels and other underground structures
Contact us
Choose a location
P.O. Box: 123808, Dubai
Toll: +971 4 8803488
Fax: +971 4 8803450
Site Map