Waterproofing

Combo Roof System

Monneli Colmefoam HD

Spray Polyurethane Foam For Roof Waterproofing

back to Waterproofing
Technical Information
Product Description

Colmefoam HD is a Rigid Polyurethane Foam. Suitable for the insulation of roofs, sheds, bays, farms, storage tanks and pipes through spraying process. The foam is flame retarded and classified B2 as per DIN 4102.

 

Processing Conditions

Processing Conditions: Material Temperature 20-22 °C
Mixing Ratio: A/B 100/100 p.b.v

 

Lab Reactivity Profile at 10 °C

Cream Time: 6-8 sec
Gel Time: 15-18 sec
Rise Time: 20-25 sec
Final Density: 45-50 Kg/m³

Packaging, Coverage / Consumption

Part A: 210 kg

Parb B: 250 kg

Technical Properties
Properties   Part A Part B
Viscocity at 20 °C mPa.s 300-400 180-270
Specific Gravity at   1.16 1.17
Storage Temperature °C 10-25 10-25
Stability Months  6  6
       
Physical Properties      
Compression Strength @ 10% Deformation      
Parallel to foam rise 0.16-0.21 N/mm² ASTM C 165
Perpendicular to foam rise 0.12-0.15 N/mm² ASTM C 165
Dimensional Stability (Volume change)      
@ -20°C < 1 % Volume DIN 53431
@ +70°C < 1 % Volume DIN 53431
Closed Cell Content >93 % ASTM 2856
Thermal Conductivity (Initial Lambda) 0.021 W/m°K  
Fire Behavior B5 Class Class sDIN 4102
Application Information
Additional Information
Important note

The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updated on regular basis. It is the user’s responsibility to obtain the latest version.

additional materials
Fast Download
Technical Properties Sheet
download (*.pdf 0.10Mb)
OTHER PRODUCTS
More Products from this section
Monneli Armofab

Non-Woven Geotextile Reinforcing / Protection Fabrics

Monneli Colmefoam LHD

Spray Polyurethane Foam

RANDOM PRODUCT
Monneli Epofinish C

Fairing Coat Solvent Free Epoxy Mortar

Uses
EPOFINISH C is designed to provide repairs to surfaces in different situations, such as:
• Crack repairs in structural components, like bridges, industrial structures, columns, beams, foundations, walls and floors slabs
• Filling pinholes prior to over coating
• General re-profiling over large areas
• Dowel bars anchoring
• Bolt pocket, filling
• Used as adhesive to fix slip brick to concrete
• Repair surface defects on steel bridges bearings
• Used as bedding mortar for bridge beams or steel bridges bearing
• Used as mortar bedding in manhole chambers
• General re-profiling over large areas
Contact us
Choose a location
P.O. Box: 123808, Dubai
Toll: +971 4 8803488
Fax: +971 4 8803450
Site Map