Surface Treatment

Water Repellant Sealer

Monneli Idrosil S

SOLVENT BASED  ACRYLIC SEALER, SURFACE TREATMENT, ENHANCER AND HARDENER FOR LIME STONE, CONCRETE AND MASONRY

Uses
• As a universal versatile lime-stone and masonry
• surface sealer and hardener
• Enhancing weak lime-stone and masonry floors strength
• As a dust proofer for cementitious surfaces.
• Sealing of highly porous cementitious substrates and durable seal for stamped concrete
back to Surface Treatment
Technical Information
Product Description

IDROSIL S is a multi-grade surface sealer and hardener for concrete, masonry and natural stone. The product can be used as a film-forming or non-film forming depending on the grade used. Its versatility allows it to be used in various applications on concrete, masonry, lime based elements, cement boards, mineral plasters, natural and artificial stone conglomerates.

Advantages
  • Single component easily applied by brush, roller or spray
  • Versatile with applications of a large number of coating materials and sealants
  • Designed for highly porous weak surfaces
  • High wetting properties
  • Specifically designed for natural stone present in the MENA region.
  • Cost effective, suitable for use in MENA region weathering conditions
Packaging, Coverage / Consumption

IDROSIL S 20 Liter Pail

Shelf Life & Storage

Original sealed pail of IDROSIL S has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 35°C.

Technical Properties
Solid Content

100%

Wet Appearance

Clean

Dry Appearance

Transparent

Film Finish

Film-Forming

Practical Coverage / Coat (m²L)

4-6

Number of Coats

1

Dry Time (25°C & RH50%)

45 minutes

Best Used As

Film Forming Sealer

Best Application Technique

Roller

Alternative Application Technique

Brush

Application Information
Instructions for use

Application

Product application will depend on the grade used as per the technical properties table.

Cleaning

Equipment and tools used can be cleaned using
SOLVENTE 10 immediately after use. Shall residual material exist or harden, mechanical means such as wire brush would be required to remove residue.

Surface Preparation

Surface must be sound and throughly cleaned before IDROSIL S is applied. All loose particles, old mortar, laitance, dirt, paint etc., must be removed by brushing with a stiff / wire brush or other suitable means. Fungi or Algae should be scoured away using hypochlorite type type bleach or proprietary fungicidal solution and then washed with water. All traces of oil and grease must be removed with an industrial grade chemical degreaser or another suitable degreasing agent.

Additional Information
Health & Safety

IDROSIL S should not come into contact with skin and eyes or be swallowed. Avoid inhalation of vapor and spray. Use only in well ventilated areas. In case of insufficient ventilation wear suitable respiratory protection. Wear suitable protective clothing, gloves and eye / face protection. Barrier creams provide contact occur, remove immediately with a suitable skin contact occur, remove immediately with a suitable skin, cleanser followed by washing with soap and water. In case of contact with eyes, rinse immediately with plenty of water and seek medical attention immediately. do not induce vomiting.

additional materials
Fast Download
Technical Properties Sheet
download (*.pdf 0.10Mb)
OTHER PRODUCTS
More Products from this section
Monneli Idrosil A

Water Repellant Penetrating Water Based Sealer

Monneli Idrosil L

Water Repellant Acrylic Sealer

Monneli Idrosil XS

Solvent Based Silane-Siloxane Penetrating Water Repellant Treatment

RANDOM PRODUCT
Monneli Elastojoint PVC

Flexible PVC Waterstop

Uses
Reservoirs
Water towers and sewage tanks
Dams and culverts
Canals and spillways
Swimming pools
Basements and underground car parks
Tunnels and Subways
Retaining walls and roof decks
Contact us
Choose a location
P.O. Box: 123808, Dubai
Toll: +971 4 8803488
Fax: +971 4 8803450
Site Map