Mortar Specialties

Primer

Monneli Primer A16

Synthetic Resin Primer

Uses
PRIMER A16 is used for the preventive treatment prior to laying of ceramic tiles with the cement adhesive on gypsum boards. Such application on the supports avoids the chemical reaction between the gypsum sulphates and the cement aluminates contained in the adhesives for ceramic tiles, which in case of humidity presence could provoke breakaway of tiles.
It can be also used at gypsum or very porous supports before painting with acrylic or vinyl paints, to avoid too fast drying.
PRIMER A16 is used on light weight plaster and other porous surfaces such as asbestos boards, on wood, hardboard, chipboard, and so on, before fixing ceramic wall and floor tiles in the usual way.
back to Mortar Specialties
Technical Information
Product Description

PRIMER A16 is a water based synthetic resin with high penetrating power. Once applied on the surface it dries forming a transparent and compact film. The film has a function of protective barrier, which improves the support's absorption against liquid and it improves the adhesion of ceramic tiles, paints, wallpapers, plasters, etc. to the surface.

Advantages
  • As an anchoring coat over gypsum plaster
  • Improves adhesion of smoothing compounds, paints, adhesives for wall papers, adhesives for tile mortar, and mortars for render
Packaging, Coverage / Consumption

Packaging:

PRIMER A16 is supplied in 20 Liter plastic containers.

 

Consumption: 

0.1 – 0.2 Liter / m² depending on the porosity of the surface.

Shelf Life & Storage

Storage:

Store the product in dry closed place with temperature between +5°C and +35°C. The product maintains its stability for 12 months from production date.

Colors
Milky white
Technical Properties
PROPERTIES

RESULTS

Appearance

Liquid

Color

Milky white

Density of 25°C

1.02 kg/L

VOC

Negligible

pH at 25°C

7 – 8

Drying time

2 hours

Service temperature

+5°C to 70°C

Temperature of application

+5°C to +35°C

Noxiousity CEE 88/379

No

All values are subject to 5-10 % tolerance

Application Information
Instructions for use

Surface preparation

The support must be dry and clean, free from traces of grease, oils, etc. Gypsum plasters must be cured.

PRIMER A16 should not be applied on gypsum plaster till humidity content in the plaster is less than10%.

Mixing

Stir the product before use. If used as a Paint primer, dilute with water at a ratio of 1: 2.

Application

Apply with a brush, roll or sprayer, taking care of spreading it evenly onto the surface.

Consecutive works could start immediately after PRIMER A16 dries.

In some cases, it is necessary to repeat the treatment on very porous supports.

Cleaning

Clean the tools with water when the product is still wet. Dry residues should be removed mechanically or with a solvent.

Additional Information
Health & Safety

During application, wear appropriate protective clothing, goggles, gloves and respiratory equipment if necessary.

 

In case of contact with skin, rinse with water and again wash thoroughly with soap and water. In case of contact with eyes, rinse with plenty of water and seek medical advice accordingly.

 

If ingested, obtain medical attention immediately. Do not induce vomiting.

Important note

The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.

additional materials
Fast Download
Technical Properties Sheet
download (*.pdf 0.30Mb)
OTHER PRODUCTS
More Products from this section
Monneli Primer A18

Synthetic Resin, High Penetrating Primer

RANDOM PRODUCT
Monneli Betocem Flow

Fluid Non-Shrinking Mortar for Degraded Concrete Repair

Uses
BETOCEM FLOW is used in repairing and constructing of elements that are degraded or damaged. It is ideal for the reinstatement of large, structural sections of concrete as well as for small structural elements where it is difficult to cast or to apply mortar. Structural consolidation of concrete beams, columns, walls, honey combed concrete, floors and pillars, for reparation of concrete pavements (roads, airports, industries), for rigid joints filling, up to 4 cm of thickness, in prefabricated residential and industrial building.
Contact us
Choose a location
P.O. Box: 123808, Dubai
Toll: +971 4 8803488
Fax: +971 4 8803450
Site Map