Waterproofing

Bitumen Waterproofing

Monneli Betoboardi

Protective Bituminous Board

Uses
BETOBOARDI can be used in the following:
Protective layer during backfilling for areas below the ground (basements, foundation walls, etc.)
Used to avoid damage during construction traffic
Protects horizontal areas before laying of concrete, etc.
Protects the waterproofing layer of foundation walls, parking decks, terraces, flowe boxes and concrete slabs, etc.
Protective walkway to avoid damage to waterproofing layer on roofs against foot traffic to inspect air conditioning units, machinery mineral slate finished version.
Can be used as support element for refurbishment of the waterproofing in the 6mm version mechanically fixed.
back to Waterproofing
Technical Information
Product Description

BETOBOARDI is a pre-formed bituminous board modified with a special rigid compound. It is used to protect the waterproofing during backfilling procedures (retaining walls, fixed pavements, cast concrete etc.) and construction traffic.

Advantages
  • Very high resistance to puncture
  • Resists and protect against normal site traffic
  • Resists to normal chemicals found in the soil, chlorides, lasts, etc
  • Protects while pouring concrete slab, etc.
  • Water impermeable and resistant to vapor transmission
  • Compatible with most commonly used waterproofing methods
  • Resistant to normal impact during backfilling procedures
  • Not affected by repeated immersion in ground water, rot-proof
  • Can be applied by torching and is suitable for mechanical fixing.
  • Durable
  • Manufactured to suit hot climate conditions
Compiliance Standard
  • ASTM D36
  • EN1426
  • EN12730
  • EN13501-1
Packaging, Coverage / Consumption

Packaging:

BETOBOARDI is supplied in sheets

Available in 3mm, 4mm and 6mm.

 

Dimension:  

1m x 2m

Shelf Life & Storage

Storage:

BETOBOARDI must be stored in a well ventilated, covered storage area away from any source of direct heat. Rolls must be kept in an upright position at all times.

 

Shelf life:

12 months from the date of production  if stored properly in original unopened packing.

Technical Properties
PROPERTIES RESULTS
Type of compound APP
Softening ring & ball (ASTM D36)  130°C 
Density 1.53kg/L 
Penetration at 25°C (EN1246) 13 (1/10mm)
Static puncture resistance (EN 12730) 20kg
Mass x unit area (EN 1849)  
  1.8kg/m² for 3mm
  9.3kg/m² for 6mm
All values are subject to 5-6% tolerance
Application Information
Instructions for use

Application

BETOBOARDI should be applied  over the waterproofing system on both the flat and vertical areas by spot binding, lightly torching the material or with a suitable adhesive. It can also be glued using bituminous mastic.

Recommendations

  • Avoid excessive and uneven application of heat.
  • It is recommended to use protective gloves during installation.

 

 

Additional Information
Health & Safety

BETOBOARDI  have no health hazards when used with our standard application recommendations.

Important note

The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updated on regular basis. It is the user’s responsibility to obtain the latest version.

additional materials
Fast Download
Technical Properties Sheet
download (*.pdf 0.28Mb)
OTHER PRODUCTS
More Products from this section
Monneli Asfabit

Cold Applied Bitumen Emulsion

Monneli Asfabit EM

Emulsified Thixotropic Flexible Protective Barrier to Vapor Transmission

Monneli Asfabit Prime

Quality Black Bitumen Primer

Monneli Asfabit RB

Flexible, Rubberized Bitumen Emulsion

Monneli Asfabit RB+

FLEXIBLE, RUBBERIZED BITUMEN EMULSION

view more
RANDOM PRODUCT
Monneli Epofloor SLE40

SELF SMOOTHENING EPOXY BASED FLOOR TOPPING FROM 3mm to 5mm THICKNESS

Uses
EPOFLOOR SLE40 is used for industrial flooring where intense transit is used even with rubberized wheels equipments such as forklifts. EPOFLOOR SLE40 is the ideal solution for flooring in high abrasion or impact loading situation.
It is used in the following:
Clean rooms and laboratories
Industrial kitchen and food processing plants
Vehicle factories and car park
Warehouses
Heavy duty applications, turbine rooms, armories and hangars
Contact us
Choose a location
P.O. Box: 123808, Dubai
Toll: +971 4 8803488
Fax: +971 4 8803450
Site Map