Industrial Flooring

Primers

Monneli Primer Poxy FF*

Solvent Free Epoxy Primer

Uses
PRIMER POXY FF* is used as follows :
As a universal versatile primer for resinous flooring and concrete repair systems especially screeds and self smoothening toppings
Sealing of highly porous cementitious substrates prior to topcoating with EPOFLOOR range
back to Industrial Flooring
Technical Information
Product Description

PRIMER POXY FF* is a universal primer for the EPOFINISH and EPOFLOOR product range, its applied on prepared concrete and cementitious substrates to seal the substrate and enhance bonding with top coats. PRIMER POXY FF* is a two component solvent free epoxy resin that has sealing properties making it ideal for concrete substrates.

Packaging, Coverage / Consumption

Packaging:

PRIMER POXY FF* is supplied in 15 Liter kits.

 

Consumption:

7-10 m² / liter per coat according to the porosity of the surface.

Shelf Life & Storage

Storage:

Store the product in dry closed place with temperature between +5°C and +35°C. In these conditions, the product maintains its stability for 12 months.

Technical Properties
PROPERTIES RESULTS
Appearance  Semi – Translucent Creamy Liquid 
Solid content  100% 
Mix density at 20°C  1.3  kg /L
Pot-life time at 20°C 1 hour
Tack free time at 20°C 18 hours
Adhesion Bond to Concrete   Higher than host concrete cohesive strength
Density at 25°C 1.25kg/L
All values are subject to 5-10% tolerance
Application Information
Instructions for use

Surface Preparation

The surface should be sound, clean, dry and free from loose and flaking materials, efflorescence, laitance, curing compounds, dirt, oil, grease or other  contaminants. Mechanical methods like grinding or grit/captive blasting in order to provide a suitable profiled open textured surface is strongly recommended.
New concrete or cementitious surfaces should be at least 28 days old, have moisture content not exceeding 5% and relative humidity of the concrete is 75% or below. Old or existing floor should be refurbished mechanically to ensure clear sound substrate.

Mixing

Mix PRIMER POXY FF* as supplied. Add the entire content of hardener can to the base can and mix thoroughly for about 2 minutes.

Application

Once mixed, the PRIMER POXY FF* shall be immediately applied in a thin continuous film using stiff brushes or rollers. Avoid over-application and puddles. PRIMER POXY FF* shall be allowed to become tack- free prior to the application of epoxy coating (unless otherwise specified) but well within the open time specified for the given temperature.

General Applications

n Priming of joint edges to receive urethane, epoxy, and polyurea based sealants.

n Priming of concrete slabs and walls to receive solvent free epoxy, urethane, MMA, polyurea, hybrid coatings, screeds and self smoothening toppings.

n Priming of concrete substrates to receive epoxy and urethane based repair mortars.

n Priming of cementitious screeds to receive epoxy, urethane and resinous toppings.

Cleaning

Clean tools with SOLVENTE 10 promptly before material hardens. Cured material must be mechanically removed.

Recommendations

n Don’t apply the product with imminent rain

n PRIMER POXY FF* should not be applied on asphalt floor and PVC tiles.

Additional Information
Health & Safety

Avoid contact with skin & eyes. Protective clothing such as gloves & safety goggles should be worn during application.  Treat any splashes to the skin or eyes with fresh water immediately.  

Should the product be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately.  Ensure adequate ventilation at site and avoid inhalation of vapors.

Important note

The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.

additional materials
Fast Download
Technical Properties Sheet
download (*.pdf 0.28Mb)
OTHER PRODUCTS
More Products from this section
Monneli Primer Poxy

Solvent Based Epoxy Primer

Monneli Primer Poxy (FC)

Fast Cure Solvent-Free Epoxy Primer for Concrete Floors

Monneli Primer Poxy (IF)

Penetrating Solvent-Free Epoxy Primer for Concrete Floors

Monneli Primer Poxy FF

Solvent Free High Performance Epoxy Primer

Monneli Primer Poxy WB

Water Based Epoxy Primer

view more
RANDOM PRODUCT
Monneli Neofil P8

Ready-Mixed Elastic Tile Adhesive Paste

Uses
NEOFIL P8 is used for interior laying of woods, vinyls, tiles and ceramics, mosaics of every type, natural stones, on cement plasters, prefabricated panels, reinforced concrete, asbestos cement and on gypsum plasters, gypsum panels, plasterboard, etc., without the necessary of using PRIMER A 16.
Thanks to its elasticity, NEOFIL P 8 is particularly suitable for fixing tiles on walls or floors affected by strong movements.
It is used for the gluing of insulating materials such as polystyrene, expanded polyurethane, expanded cement elements, etc. on porous supports.
Contact us
Choose a location
P.O. Box: 123808, Dubai
Toll: +971 4 8803488
Fax: +971 4 8803450
Site Map