Water Repellant Anti-Fungus Tile Grout
FUGACOLOR is latex modified, fast setting, high performance, anti efflorescence, water repellent & anti fungus tile grout. The product is composed of a blend of special hydraulic binders, graded silica, special polymers, additives, water repellent agent, anti fungus agent mixed with stable & UV resistant colouring pigments.
The grout does not contain Portland cement which generates calcium hydroxide crystals and cause efflorescence during the hydration process. It has a high resistance for water absorption which reduces the dirt accumulation in the grout. Anti fungus / anti bacteria additive in the mix, blocks the generation of bacteria and mould.
FUGACOLOR is supplied in 20kg bags.
Store in a dry covered place in original well closed packaging. Shelf life is 12 months if stored as recommended.
|Density (dry) at 25⁰C||
|Workable Time at 25º C||
|Compressive strength (ASTM C579)||
> 30.0 N / mm²
|Flexural strength (ASTM C580)||
6.0 N / mm²
|Water Absorption (EN13888)||
|Resistance to moisture||
|Resistance to Ageing||
|Resistance to Solvents & Oils||
|Resistance to alkalis||
|Noxiousity CEE 88/379||
Mix 7.5 – 8.75 Liters of cold, potable water (or GIUNTOLASTIC instead of water as needed),in the mixing bucket and add slowly 25kg bag of FUGACOLOR under continuous mixing until a uniform lump free consistency mix is achieved.
After mixing, let the material rest for about 10 minutes, then remix and spread using a rubber grout float.
Let the product set for about 20 minutes and then clean with a damp sponge. After the complete hardening, clean all the surface of the tile with a dry cloth.
All used tools should be cleaned with water before the product cures.
Make sure that the tiles adhesive is totally set before applying FUGACOLOR grout. The joints must be clean, free of dust. Clean the joints between tiles and brush before grouting.
FUGACOLOR can be harmful to skin as it contains cement powders which may releases alkalis when mixed with water.
During application, wear appropriate protective clothing, goggles, gloves and respiratory equipment if necessary.
In case of contact with skin, rinse with water and again wash thoroughly with soap and water. In case of contact with eyes, rinse with plenty of water and seek medical advice accordingly.
If ingested, obtain medical attention immediately. Do not induce vomiting
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.
Synthetic Latex Additive for Cementitious Grout
Latex Modified Cementitious Tile Grout for Joints 0-4 mm Wide
Latex Modified Cementitious Tile Grout for Joints 4-20 mm Wide
Grout for Sealing Glass Blocks
ELASTOMERIC POLYURETHANE LIQUID APPLIED WATERPROOFING MEMBRANE