Protective Coating


Monneli Armaturea BG

Brush Grade Polyurea

Industrial Floorings
Waste Treatment Pool
Tunnel Waterproof
Bridge Piers
Roof Waterproofing
Airport Runways
Pool Decks
back to Protective Coating
Technical Information
Product Description

ARMATUREA BG a single component, high solids polyurea coating, which is imparted with an extraordinary durability, chemical, impact and wear resistance performance.

  • Excellent Flexibility, even in cold temperature
  • Excellent Thermal Stability
  • Excellent Abrasion and Wear Resistance
  • Excellent Adhesion to a Variety of Substrate
  • Good Chemical Resistance
  • Excellent Water Resistance
  • Excellent Corrosion Resistance
  • Excellent Durability
  • Excellent Workability, Unlimited Pot Life
  • Easy Application
Compiliance Standard
  • ASTM D412
  • ASTM D624
  • ASTM D4060
  • ASTM D2240
Packaging, Coverage / Consumption

20/25kg/bucket Be sure the product is well packed and sealed.

Shelf Life & Storage

ARMATUREA BG should be stored in original, unopened factory containers, under normal storage conditions of 15° C to 35° C. In these conditions, prouct shelf life is 12 months from the date of production. Keep it far away from direct sunlight and fire source.

Technical Properties
Shore D Hardness (ASTM D 2240)


Tensile Strength (ASTM D412)

34.3 Mpa

Elongation (ASTM D412)


Tear Strength (ASTM D624)

79.4 Mpa

Water Absorption (%)

3. 1

Wear Resistance(750g/500r) (GB/T23446-2009)

10 mg

Adhesive Strength (concrete) (GB/T23446-2009)

3.2 Mpa

Adhesive Strength()(steel) (HG/T3831-2006)

10.6 Mpa

Impact resistance (GB/T23446-2009)


Cohesion Strength (GB/T23446-2009)


Impact resistance (kg • m)


Flexural endurance at -40"C ( -40"F ) (GB/T23446-2009)

no crack

Density (g/cm) (GB/T23446-2009)


Application Information
Instructions for use


Before opening the product, remove the dust and other
impurities around the lid in case those materials mix with the
product. Crust inside the bucket if any, must be removed to
prevent any negative effect on the quality of material


ARMATUREA BG does not require specific spray equipment.

Additional Information
Health & Safety

All body parts should be covered and activated charcoal respirators or forced-air breathing apparatus are necessary for safe application of this product. Keep uncured product away from children at all times. All personnel should read and understand the safety recommendations stated in the Material Safety Data Sheet .

Important note

The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updated on regular basis. It is the user’s responsibility to obtain the latest version.

additional materials
Fast Download
Technical Properties Sheet
download (*.pdf 0.13Mb)
More Products from this section
Monneli Armaturea A1

Aromatic Pure Polyurea

Monneli Armaturea A2

Advanced Formula Aromatic Pure Polyurea

Monneli Armaturea AL

Polyurethane Top Coat (Thin Film) UV Stable

Monneli Armaturea PA

Polyaspartic Polyurea Topcoat

Monneli Armaturea SL

Aromatic Self-Leveling Polyurea Flooring

view more
Monneli Epofloor E2000

High Build Solvent Free Epoxy Flooring System

Parking decks, garages and car wash areas
Aircraft hangers and maintenance areas
Warehouses, industrial floors
Pedestrian walkways
Contact us
Choose a location
P.O. Box: 123808, Dubai
Toll: +971 4 8803488
Fax: +971 4 8803450
Site Map