Polymer Modified Two Component Cementitious High Deformable Tile Adhesive
A two-component cement-based professional grade highly deformable tile adhesive that works with most tiles and flexible substrates. The product is composed of a blend of cement, carefully selected aggregates, special additives, and polymers that provide NEOFIL F50 S2 with its unique properties. The product is suitable for internal and external use, including submerged conditions such as swimming pools and water reservoirs.
Packaging:
NEOFIL F50 S2 is packed in 27 kg kit.
Consumption:
Storage:
The original sealed bag & container of NEOFIL F50 S2 have a shelf life of 12 months provided it is stored clear of ground in a dry, shaded place below 35°C.
|
|||||||||||||||||||||||||||
Surface Preparation
The substrate should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, or any other substance that might impair bond quality with the substrate. Concrete, hollow blocks, and cement-based substrates must be sufficiently cured and irrigated by water 1 hour before application. Gypsum boards, plasterboards, anhydrite screeds must be sufficiently dry and free from dust.
Mixing
Add to the mixing container the 7 liters Part B of NEOFIL F50 S2 then add the 20 kg bag Part A powder to the liquid and mix with a mechanical mixer or low-speed heavy-duty electric drill fitted with a suitable paddle for 3-4 minutes until achieving a uniform, lumpfree consistency.
Application
Apply a thin layer of the adhesive onto the substrate using the flat edge of the trowel. Comb the adhesive with a suitable notched trowel to achieve a bed thickness of 2- 6 mm. Place the tiles with firm pressure to ensure proper contact with the adhesive. It is always better to work in a manageable area that can be tiled within the adhesive’s open time. Leave the tiled surfaces for 24 hours before grouting.
Note: The adhesive bed’s thickness is directly proportional to the size and thickness of the tile.
For further information regarding the suitable substrates and tiles on which this product can be safely applied, please contact Colmef technical department.
Cleaning
Clean tools and equipment with water immediately after use. Remove the hardened material using mechanical means.
NEOFIL F50 S2 is highly alkaline; therefore, avoid direct contact with eyes or skin. It is recommended to use protective gloves and goggles during application. Any skin contact should be washed with soap and water. In case of eye irritation, immediately wash with a copious amount of clean cold water. Seek medical advice.
NEOFIL F50 S2 is non-flammable.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.
Two Component Fast - Setting Cementitious Tile Adhesive
Cementitious Adhesive for Natural & Artificial Stone
Synthetic Latex Additive for Tile Adhesive
Polymer Modified Floor Tile Adhesive Up To 15 mm Thick Mortar
THICK BED TILE ADHESIVE FOR INTERIOR & EXTERIOR USE
Light Weight Screed