Brush Grade Polyurea
ARMATUREA BG a single component, high solids polyurea coating, which is imparted with an extraordinary durability, chemical, impact and wear resistance performance.
20/25kg/bucket Be sure the product is well packed and sealed.
ARMATUREA BG should be stored in original, unopened factory containers, under normal storage conditions of 15° C to 35° C. In these conditions, prouct shelf life is 12 months from the date of production. Keep it far away from direct sunlight and fire source.
|Shore D Hardness (ASTM D 2240)||
|Tensile Strength (ASTM D412)||
|Elongation (ASTM D412)||
|Tear Strength (ASTM D624)||
|Water Absorption (%)||
|Wear Resistance(750g/500r) (GB/T23446-2009)||
|Adhesive Strength (concrete) (GB/T23446-2009)||
|Adhesive Strength()(steel) (HG/T3831-2006)||
|Impact resistance (GB/T23446-2009)||
|Cohesion Strength (GB/T23446-2009)||
|Impact resistance (kg • m)||
|Flexural endurance at -40"C ( -40"F ) (GB/T23446-2009)||
|Density (g/cm) (GB/T23446-2009)||
Before opening the product, remove the dust and other
impurities around the lid in case those materials mix with the
product. Crust inside the bucket if any, must be removed to
prevent any negative effect on the quality of material
ARMATUREA BG does not require specific spray equipment.
All body parts should be covered and activated charcoal respirators or forced-air breathing apparatus are necessary for safe application of this product. Keep uncured product away from children at all times. All personnel should read and understand the safety recommendations stated in the Material Safety Data Sheet .
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updated on regular basis. It is the user’s responsibility to obtain the latest version.
Aromatic Pure Polyurea
Advanced Formula Aromatic Pure Polyurea
Polyurethane Top Coat (Thin Film) UV Stable
Polyaspartic Polyurea Topcoat
Aromatic Self-Leveling Polyurea Flooring
SULPHATE RESISTANT BLOCK & BRICK LAYING MORTAR