Aromatic Self-Leveling Polyurea Flooring
ARMATUREA SL is a self-levelling aromatic MDI based polyurethane designed as a flexible elastomeric waterproofing membrane. It produces an abrasionresistant and smooth finish when cured.
ARMATUREA SL can display rapid turn-a-around times (depending on catalyst levels), virtually odorless and performs well in high and low humidity environments.
16 Liter Kit: 4 Liters of Part A and 12 Liters of Part B
ARMATUREA SL should be stored in original, unopened factory containers, under normal storage conditions of 15° C to 35° C. In these conditions, prouct shelf life is 12 months from the date of production.
|Taber Abrasion, Loss CS 17 Wheel 1kg,1000 Rev (ASTM D4060)||
|Tear Strength (ASTM D624)||
|Elongation (ASTM D412)||
|Tensile Strength (ASTM D412)||
|Open to Top Coat||
24 Hours Post TF*
|Open to Foot Traffic (No Catalyst)||
|Volume Ratio (A:B)||
1 : 3
|Gel time (25°C) (No Catalyst)||
Medium Gray or Black
ARMATUREA SL must be applied using an approved equipment. For application guidelines based on your required system and substrate, please contact Colmef.
Clean equipment immediately after use.Cured product may be disposed of without restriction. The un-cured isocyanate and resin portions should be disposed of in accordance with local government regulations.
The surface of the substrate shall be sound, clean and uncontaminated.
This preparation shall be such as to leave a sound expose surface free from dust, loose particles and any deleterious matter. If the surface is defective or has laitance, it must be cut back to a sound base.
New concrete or cementitious surfaces should be at least 28 days old and have moisture content not exceeding 5%. Old or existing surface should be refurbished mechanically to ensure clear and sound substrate.
All body parts should be covered and activated charcoal respirators or forced-air breathing apparatus are necessary for safe application of this
product. Keep uncured product away from children at all times. All personnel should read and understand the safety recommendations stated in the Material Safety Data Sheet .
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updated on regular basis. It is the user’s responsibility to obtain the latest version.
Aromatic Pure Polyurea
Advanced Formula Aromatic Pure Polyurea
Polyurethane Top Coat (Thin Film) UV Stable
Brush Grade Polyurea
Polyaspartic Polyurea Topcoat