Industrial Flooring

Primers

Monneli Primer Poxy

Solvent Based Epoxy Primer

Uses
PRIMER POXY is used as follows:
Serves as a consolidating treatment on friable supports prior to application of epoxy / polyurethane coatings
Works as an anti-dust treatment of industrial floorings
Serves as primer on semi-porous substrate prior to the application of epoxy or polyurethane coating
back to Industrial Flooring
Technical Information
Product Description

A two component fluid epoxy resin with high penetrating ability, formulated to act as an adhesive primer between the substrate and the epoxy, or polyurethane coating.

Advantages

n No crystallizing

n Good adhesion

n Impermeability to liquids

n Good chemical resistance

n Excellent abrasion resistance

n Primer and sealer coat in one product

Packaging, Coverage / Consumption

Packaging:

PRIMER POXY is available in 4 and 15 Liter packing.

 

Consumption: 

6-8 m²/ Liters per coat according to the porosity of the support

Shelf Life & Storage

Storage:

Store the product in dry closed place with temperature between +5°C and +35°C. In these conditions, the product maintains its stability for 12 months.

Colors
Amber
Technical Properties
PROPERTIES RESULTS
Appearance Liquid
Color  Amber
Mix density at 25°C  0.96 kg /L 
Pot-life time at 25°C  90 minutes
Re-coatable at 25°C  after 8-12 hours 
Bonding strength Greater than cohesive strength of concrete substance
Tests performed at 25°C, 50% of relative humidity and in absence of ventilation.  
All values are subject to 5-10 % tolerance 
Application Information
Instructions for use

Surface preparation

All surfaces should be sound, clean, dry and free from loose and flaking material, efflorescence, laitance, curing compounds, dirt, oil and grease.

New concrete or cementitious surfaces should be allowed to cure and have moisture content not exceeding 5%. Old or existing floor should be refurbished mechanically to ensure clear sound substrate.
In case of old concrete floors use mechanical methods like grinding or blasting in order to provide a suitable clean surface. All necessary repairs should be made prior to application by using COLMEF epoxy mortar.

Mixing

For the preparation of product, pour component B (hardener) into component A (resin) and mix carefully with electric mixer at low number of turns, till obtaining a perfect mix. Allow the product to induct for 10 minutes to reduce the risk of epoxy blush.

Application

Apply the product with a brush or roller. For spraying application, dilute the product with 5% SOLVENTE 10. Use 0.015 to 0.021 in nozzle size.

For treatment of friable substrate or very porous surface, apply the product up to complete saturation of the support. Onto very compact supports, avoid the build-up of material.

Re-coating can be executed after 8-12 hours depending on surface and temperature conditions.

Cleaning

Clean tools with SOLVENTE 10 promptly before material hardens. Cured material must be mechanically removed

Recommendations

n Don’t apply the product with imminent rain forecast

n PRIMER POXY should not be applied on asphalt floor and PVC tiles

n PRIMER POXY should not be applied on the concrete surface that has greater than 4% maximum moisture content.

Additional Information
Health & Safety

Avoid contact with skin & eyes. Protective clothing such as gloves & safety goggles should be worn during application. Treat any splashes to the skin or eyes with fresh water immediately.

Should the product be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately. Ensure adequate ventilation at site and avoid inhalation of vapors.

 

Important note

The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.

additional materials
Fast Download
Technical Properties Sheet
download (*.pdf 0.28Mb)
OTHER PRODUCTS
More Products from this section
Monneli Primer Poxy (FC)

Fast Cure Solvent-Free Epoxy Primer for Concrete Floors

Monneli Primer Poxy (IF)

Penetrating Solvent-Free Epoxy Primer for Concrete Floors

Monneli Primer Poxy FF

Solvent Free High Performance Epoxy Primer

Monneli Primer Poxy FF*

Solvent Free Epoxy Primer

Monneli Primer Poxy WB

Water Based Epoxy Primer

view more
RANDOM PRODUCT
Monneli Asfabit RBL

RUBBERIZED BITUMEN EMULSION

Uses
ASFABIT RBL can be used as follows:
Provides a sandwich membrane between screed flooring
A waterproofing coat for concrete foundations, bricks, retaining walls, etc.
It can be used to waterproof walls and floors in wet areas
For maintenance of many types of roofs including built up felt, aluminum, concrete, lightweight screed, timber, slate, asbestos, bitumen sheets, etc.
As a vapour/salt barrier for exterior walls to building facades behind granite, marble, stone, cladding, curtain walls, etc.
Can be used as adhesive for insulation boards and expanded polystyrene
As curing compound for freshly cast concrete
Contact us
Choose a location
P.O. Box: 123808, Dubai
Toll: +971 4 8803488
Fax: +971 4 8803450
Site Map