Colmef

Monneli Armofab

Non-Woven Geotextile Reinforcing / Protection Fabrics

Uses

ARMOFAB is suitable for application on reinforced / nonreinforced waterproofing membranes and widely used in the infrastructure works, backfilling and road and bridges projects.

ARMOFAB could be positioned both horizontally and vertically with either mechanical or spot gluing using suitable glue from Colmef’s product range (NEOFIL S10, NEOFIL M10 etc)

back to Waterproofing

Technical Information

Product Description

ARMOFAB is a wide range of geotextile fabric that can be used as reinforcement for wide variety of applications or protection for waterproofing membranes.

ARMOFAB is produced in nine grades (ARMOFAB 120P ARMOFAB 140P, ARMOFAB 200P, ARMOFAB 300P ARMOFAB 350P, ARMOFAB 400P, ARMOFAB 500P, ARMOFAB 800P & ARMOFAB 1000P). Each grade has a unique property that when applied or used with other suitable COLMEF products, gives the required results and protection for the waterproofing membrane against back filing or concrete works.

Advantages

Easy to install
High puncture resistance
Excellent shear adhesion and traction strength
Compatible for most types of waterproofing membranes
For backfilling & infrastructure purposes

Technical Properties

Physical
Properties

Unit

Testing
Standard

140P

200P

300P

400P

500P

800P

1000P

Basic weight

g/m²

EN ISO
9864

140± 10

200± 10

300± 10

400± 10

500 ± 10

800± 10

1000± 10

Thickness
at 2kN/m²

mm

EN ISO
9863-1/
ASTM
D5199

>0.80o

>1.0

>2.2

>3.0

>5.0

>6.0

UV Resistance
at 500 hr

%

ASTM
D4355

>72

Tensile
Strength

kN/m

EN ISO
10319/
ASTM
D4595

>9

>14

>21

>29

>38

>58

Elongation

%

EN ISO
1319/
ASTM
D4595

>60

>70

Tensile
Strength
Grab

N

ASTM
D4632

>500

>900

>1330

>1610

>2110

>3220

>3560

Tear
Strength

N

ASTM
D4533

180

380

480

580

632

1032

Puncture
Resistance
(CBR-test)

N

EN ISO
12236/
ASTM
D6241

1500

2450

3515

4600

5566

9365

11365

Burst Strength

kPa

ASTM
D3786

-----

2913

-----

Perforation
Resistance
(Cone Drop)

mm

EN ISO
13433

26

20

12

11

7

1

0

Opening Size
Q90

μm

EN ISO
12956

100

70

80

70

80

70

Permittivity

sec ^-1

ASTM
D4491

4.2

3.0

2.0

1.6

1.0

0.8

Waterflow
50mm WH

l/m²/s

EN ISO
11058

110

85

65

50

45

25

20

Durability

Armofab can be left for a period of 6-8 months exposed from installation time.

Roll Dimension

6m x 100m

Application Information

Instructions for use

Surface treatment

All surfaces where the ARMOFAB is to be applied must be well compacted, smooth, and free from projections. When otherwise necessary, it is highly advised to use compressed air or a wire brush in order to remove further dirt, or other inconsistencies in case it is applied on concrete surfaces.

Application

For waterproofing protection of substructures, roofing, watertanks bridges, roads & infrastructure works. Immediately lay ARMOFAB along the surface. Make sure to apply the fabric completely by gently rolling. When joining the ARMOFAB geotextile together, be sure to keep an overlap of at least 5 to 10 cm.

ARMOFAB is available in different grades. Refer to the technical properties tables provided below.
When ARMOFAB is to be used in conjunction with other COLMEF products, make sure to follow the recommended method of application for each product by referring always to the Technical Data Sheet.

Additional Information

Important note

The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updated on regular basis. It is the user’s responsibility to obtain the latest version.

additional materials

Fast Download

Technical Properties Sheet

download (*.pdf 0.30Mb)

OTHER PRODUCTS

More Products from this section

Monneli Colmefoam HD

Spray Polyurethane Foam For Roof Waterproofing

Monneli Colmefoam LHD

Spray Polyurethane Foam

RANDOM PRODUCT

Monneli Epomort GP

General Purpose Epoxy Mortar

Uses

EPOMORT GP is designed to provide repairs in horizontal locations up to 50 mm thickness and in vertical locations up to 15 mm in single applications.

It can also be used for all structural and general concrete repairs (interior, exterior, above and below grade) including: Casting resumption between fresh and old concrete.

Concrete residential driveways

Patios

Balconies

Walkways

Garages and other concrete surfaces exposed to normal foot and rubber-wheeled traffic

Sewerage works and manhole linings

Connected products

Monneli Neofil M10

Ready to Use Acrylic Adhesive for Floorings

Monneli Neofil S10

SBS Based Contact Adhesive

Contact us

Choose a location

P.O. Box: 123808, Dubai

Toll: +971 4 8803488

Fax: +971 4 8803450

name*
email*
phone
address
reason
message*
captcha*

Site Map

Home

About us

news and events

Contact

DOWNLOAD SECTION

REFERENCES

Waterproofing

Combo Roof System