Mortar Specialties

Cement Based Mortar

Monneli Dashbond SP

High Quality Spatter Dash Bond Coating

Uses
DASHBOND SP is specially formulated for application on fair face concrete and on AAC (Autoclaved Aerated Concrete) blocks, without a need to hack the surface.
back to Mortar Specialties
Technical Information
Product Description

A cement based premixed product for application on smooth concrete walls and ceiling to work as a rough scratch coat before applying the cement plaster.
DASHBOND SP is made to be applied directly to smooth concrete surfaces without the need to roughen the surface by hacking it.
DASHBOND SP is suitable as a base coat on precast, cement block, and conventional buildings.

Advantages
  • High quality premixed spatter dash bond coat
  • Water resistant
  • For exterior and interior use
  • Excellent workability and easy to use
  • High strength and bonding properties
Compiliance Standard
  • ASTM C 926, C 932 & C 897
  • BS 4551 Part 2, 5262 & 5492
Packaging, Coverage / Consumption

Packaging:

DASHBOND SP is supplied in 25kg and 50kg bags.

 

Consumption: 

Up to 20 m2 per 50kg bag depends on the method of application and surface condition.

Shelf Life & Storage

Storage:

Product should be stored in dry and covered place in unopened bags. In these conditions, product shelf life is 12 months from production date.

Colors
Grey
Technical Properties
PROPERTIES

RESULTS

Appearance

Powder

Color

Grey

Density

1.8 kg/L

VOC

2.1 g/L

Pot life

50 minutes

Compressive strength at 28 days (ASTM C579)

25 N / mm²

Flexural strength at 28 days (ASTM C580)

4.5 N / mm²

Chloride content

Nil

Inflammability

No

Toxicity

Non-toxic

All values are subject to 5-10 % tolerance

Application Information
Instructions for use

Surface preparation

Remove dust, loose particles, grease and traces of foreign materials which may affect the adhesion. Moisten the concrete surface or the AAC Block wall with clean water before applying DASHBOND SP. Running water on the surface should be allowed to drain prior to application.

Mixing

Add the content of DAHSBOND SP bag into a container of 10.5-11 Liters of clean water. Mix until a uniform, lump free consisting mix is achieved.

For mixing process, a slow speed drill (200 -300 rpm) fitted with a suitable paddle is recommended. Let the composition stands for nearly 5 minutes and remix again.

Application

Apply the mixture using a suitable spraying unit or with Tyrolean machine manually till you reach the required thickness (2 to 3 mm).

Composition

DASHBOND SP consists of Portland cement, special high strength hydraulic binders, aggregate and special chemical additives to achieve a high strength adhesion with water resistance and crack free coat.

Cleaning

Tools and equipment should be cleaned with water immediately after use. Hardened materials should be mechanically removed.

Recommendations

  • In case of application in summer season, it is strongly recommended to spray the concrete walls one hour before applying DASHBOND SP in order to reduce surface temperature
  • In case of concrete containing curing compound or any special additives, kindly contact Colmef Technical Department for assistance
  • For application on fair face concrete containing micro silica, 25% of the substrate should be hacked
Additional Information
Health & Safety

DASHBOND SP is a cement-based product.

 

During application, wear appropriate protective clothing, goggles, gloves and respiratory equipment if necessary.

 

In case of contact with skin, rinse with water and again wash thoroughly with soap and water. In case of contact with eyes, rinse with plenty of water and seek medical advice accordingly.

 

If ingested, obtain medical attention immediately. Do not induce vomiting.

Important note

The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.

additional materials
Fast Download
Technical Properties Sheet
download (*.pdf 0.30Mb)
OTHER PRODUCTS
More Products from this section
Monneli Dashbond

Spatter Dash Bond Coating

Monneli Dashbond SPX

Superior Quality Spatter Dash Bond Coating

Monneli Dashbond STR

Superior Quality Spatter Dash Bond Coating

Monneli Neofil BL

Normal Block Laying Mortar

view more
RANDOM PRODUCT
Monneli Insuwrap 1200 WM-UV

1.2 mm thick PVC Membrane for exposed roofing system

Uses
Waterproofing of exposed Roofs and podiums
Contact us
Choose a location
P.O. Box: 123808, Dubai
Toll: +971 4 8803488
Fax: +971 4 8803450
Site Map