Waterproofing

Combo Roof System

Monneli Armofab

Non-Woven Geotextile Reinforcing / Protection Fabrics

Uses
ARMOFAB is suitable for application on reinforced / nonreinforced waterproofing membranes and widely used in the infrastructure works, backfilling and road and bridges projects.
ARMOFAB could be positioned both horizontally and vertically with either mechanical or spot gluing using suitable glue from Colmef’s product range (NEOFIL S10, NEOFIL M10 etc)
back to Waterproofing
Technical Information
Product Description

ARMOFAB is a wide range of geotextile fabric that can be used as reinforcement for wide variety of applications or protection for waterproofing membranes.

ARMOFAB is produced in nine grades (ARMOFAB 120P ARMOFAB 140P, ARMOFAB 200P, ARMOFAB 300P ARMOFAB 350P, ARMOFAB 400P, ARMOFAB 500P, ARMOFAB 800P & ARMOFAB 1000P). Each grade has a unique property that when applied or used with other suitable COLMEF products, gives the required results and protection for the waterproofing membrane against back filing or concrete works.

Advantages
  • Easy to install
  • High puncture resistance
  • Excellent shear adhesion and traction strength
  • Compatible for most types of waterproofing membranes
  • For backfilling & infrastructure purposes
Technical Properties
Physical
Properties
  Unit Testing
Standard
  140P 200P   300P 400P   500P 800P   1000P
Basic weight   g/m2 EN ISO
9864
  140± 10 200± 10   300± 10 400± 10   500 ± 10 800± 10   1000± 10
Thickness
at 2kN/m2
  mm EN ISO
9863-1/
ASTM
D5199
  >0.80o >1.0   >2.2 >3.0   >3.0 >5.0   >6.0
UV Resistance
at 500 hr
  % ASTM
D4355
  >72 >72   >72 >72   >72 >72   >72
Tensile
Strength
  kN/m EN ISO
10319/
ASTM
D4595
  >9 >14   >21 >29   >38 >58   >58
Elongation   % EN ISO
1319/
ASTM
D4595
  >60 >60   >60 >60   >60 >70   >70
Tensile
Strength
Grab
  N ASTM
D4632
  >500 >900   >1330 >1610   >2110 >3220   >3560
Tear
Strength
  N ASTM
D4533
  180 380   480 580   632 1032   1032
Puncture
Resistance
(CBR-test)
  N EN ISO
12236/
ASTM
D6241
  1500 2450   3515 4600   5566 9365   11365
Burst Strength   kPa ASTM
D3786
  ----- 2913   ----- -----   ----- -----   -----
Perforation
Resistance
(Cone Drop)
  mm EN ISO
13433
  26 20   12 11   7 1   0
Opening Size
Q90
  μm EN ISO
12956
  100 100   70 80   70 80   70
Permittivity   sec -1 ASTM
D4491
  4.2 3.0   2.0 1.6   1.6 1.0   0.8
Waterflow
50mm WH
  l/m2/s EN ISO
11058
  110 85   65 50   45 25   20
Durability   Armofab can be left for a period of 6-8 months exposed from installation time.
Roll Dimension   6m x 100m

 

Application Information
Instructions for use

Surface treatment

All surfaces where the ARMOFAB is to be applied must be well compacted, smooth, and free from projections. When otherwise necessary, it is highly advised to use compressed air or a wire brush in order to remove further dirt, or other inconsistencies in case it is applied on concrete surfaces.

Application

For waterproofing protection of substructures, roofing, watertanks bridges, roads & infrastructure works.  Immediately lay ARMOFAB along the surface.  Make sure to apply the fabric completely by gently rolling. When joining the ARMOFAB geotextile together, be sure to keep an overlap of at least 5 to 10 cm.

ARMOFAB is available in different grades. Refer to the technical properties tables provided below.
When ARMOFAB is to be used in conjunction with other COLMEF products, make sure to follow the recommended method of application for each product by referring always to the Technical Data Sheet.

Additional Information
Important note

The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updated on regular basis. It is the user’s responsibility to obtain the latest version.

additional materials
Fast Download
Technical Properties Sheet
download (*.pdf 0.30Mb)
OTHER PRODUCTS
More Products from this section
Monneli Colmefoam HD

Spray Polyurethane Foam For Roof Waterproofing

Monneli Colmefoam LHD

Spray Polyurethane Foam

RANDOM PRODUCT
Monneli AR Latex Ripresa

Acrylic Bonding Agent & Cement Modifier

Uses
AR LATEX RIPRESA can be used as:
Bonding agent for rendering, plaster, screed and concrete
As a primer for all cement based repair products
Sealing coat and curing of concrete
As an adhesive for bonding concrete, masonry brick, etc.
Waterproof slurry coats to level and seal walls, floors and tanks
For fixing tiles when mixed with traditional cement mortar
Can be used for mortar lining of areas subject to abrasive or mild chemical action, effluent ducts, tanks, etc.
Resurfacing old concrete or granolithic floors
Connected products
Monneli Neofil M10

Ready to Use Acrylic Adhesive for Floorings

Monneli Neofil S10

SBS Based Contact Adhesive

Contact us
Choose a location
P.O. Box: 123808, Dubai
Toll: +971 4 8803488
Fax: +971 4 8803450
Site Map