Colmefoam HD is a Rigid Polyurethane Foam. Suitable for the insulation of roofs, sheds, bays, farms, storage tanks and pipes through spraying process. The foam is flame retarded and classified B2 as per DIN 4102.
| Packaging | |
| Part A | 220 Kg |
| Part B | 250 Kg |
Storage:
The storage life of this product referred to in this data sheet is provisionally 3 months from the time of production date when stored at 25°C.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Processing Conditions | ||
| Component temperature | 20 | °C |
| Mixing ratio A/B | 100/100 | p.b.v |
| Lab Reactivity Profile at 10°C |
||
| Cream time | 5-6 | sec |
| Gel time | 10-12 | sec |
| Rise time | 24.5 - 25.5 | sec |
| Final density | 40-45 | Kg/m3 |
Recommendations
During application, wear appropriate protective clothing, goggles, gloves and respiratory equipment if necessary.
In case of contact with skin, rinse with water and again wash thoroughly with soap and water. In case of contact with eyes, rinse with plenty of water and seek medical advice accordingly. If ingested, obtain medical attention immediately. Do not induce vomiting.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updated on regular basis. It is the user’s responsibility to obtain the latest version.
Non-Woven Geotextile Reinforcing / Protection Fabrics
Spray Polyurethane Foam
Rigid Polyurethane Injection Resin