Ready-Mixed Elastic Tile Adhesive Paste
NEOFIL P8 is an acrylic modified paste adhesive ready to use product composed of synthetic resins, fillers and special additives. NEOFIL P8 is water based and has a form of viscous, but easily applicable paste.
Packaging:
NEOFIL P8 is supplied in 8kg and 20kg plastic containers.
Consumption:
From 3.0 - 4.0kg per m² using notched trowel on smooth surface. Consumption will vary according to type of tiles and to support condition.
Storage:
12 months in well closed original containers if kept in a dry covered store.
|
Surface preparation
All the supports where NEOFIL P8 will be applied must be perfectly plane, solid, compact, free form dust, grease and any other material that can harm a perfect adhesion.
Mixing
Stir NEOFIL P 8 thoroughly before use.
Application
Apply NEOFIL P8 with a toothed spatula, spreading first pass with the spatula from the smooth part and then the second pass with the toothed part.
Place the tile on the adhesive bed applying sufficient pressure. To ensure full adhesion, fix the tile firmly with a slight twisting movement. In case of large size tiles, spread adhesive onto the backside of the tile (back-buttering) as well and then place the tile in to the adhesive bed. Apply enough material that can be tiled during the adhesive’s open wet time. Spreading large areas may result in drying the adhesive before tiles can be fixed causing poor adhesion.
Finishing
Remove excess adhesive with damp cloth before the material has set. Joint grouting between tiles may be commenced 10hours after tiles has been laid on the walls and 24 hours after tiles are laid on the floors.
Cleaning
Clean used tools with warm water after application is completed and before product dries.
Recommendations
During application, wear appropriate protective clothing, goggles, gloves and respiratory equipment if necessary.
In case of contact with skin, rinse with water and again wash thoroughly with soap and water. In case of contact with eyes, rinse with plenty of water and seek medical advice accordingly.
If ingested, obtain medical attention immediately. Do not induce vomiting.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.
Ready to Use Acrylic Adhesive for Floorings
Epoxy Floor Coating