Soil Stabilizer and Dust Suppressant
CONSOIL is an aqueous co-polymer emulsion resistant to saponification. It has excellent characteristic in stabilizing the soil surface once diluted with water. It penetrates into the soil to bind the particle into a more compacted unit, difficult to erode or destabilize.
Packaging:
CONSOIL is supplied in 200 and 1000 liter drums.
Storage:
Should be sealed and stored in covered area, protected from heat.
Shelf life:
9 months from manufacturing date if stored properly.
|
Surface Preparation
Pre-application
Land must be levelled and graded prior to application as the compaction of soil will improve its ability to bear pedestrian movement. However, this step is not essential to soil stabilization and dust control.
Application
For better dispersion, dilute CONSOIL with water. Spray on the compacted surface of the soil using suitable spray equipment with the following features:
CONSOIL should be sprayed at an average rate of 1 m2/liter depending on the surface absorbency. Subsequent coats shall be applied as per the rate recommended on the table (INGREDIENTS FOR 1,000 sq. m. per coat).
Recommendations
CONSOIL | WATER | MULCH | PIGMENT | ||||||
Soil stabilizer & dust control | 2 barrels | 500 Liters | Nil | Nil | |||||
Wind & water erosion, control on slopes and embankments | 3 barrels | 700 Liters | 110 kg | Nil | |||||
Landscaping including slopes and embankments | 3 barrels | 700 Liters | 110 kg | 10 – 20 kg | |||||
Hydro-seeding | 2 barrels | 600 Liters | Nil | Nil |
Recommended Mix Design for 10cm thickness screed application/ sand chemical stabilizing layer:
CONSOIL | WATER | AGGREGATES |
5 Liters | 20 Liters | 185 Liters |
*Aggregrates to contain 60% dune sand.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.
Two Component Polysulphide Sealant