Synthetic Resin, High Penetrating Primer
PRIMER A18 is a one-component water based synthetic resin with high penetrating power. It is perfectly resistant against diluted acids and alkalis. Due to the extraordinary fineness of its particles, PRIMER A18 penetrates deeply in the support, guaranteeing a good hardening degree. PRIMER A18 waterproofs the surface and improves adhesion of plaster, ceramic tiles, wall paper, etc. to the surface.
Packaging:
PRIMER A18 is available in 20 Liters and 200 Liter drums
Consumption:
0.1-0.2 Liter / m² per coat according to the porosity of support.
Storage:
Store the product in dry closed place with temperature between +5ºC and +35ºC. The product maintains its stability for 12 months from production date.
PROPERTIES | RESULTS |
Appearance | Liquid |
Color | Milky white |
VOC | Negligible |
Density of 25°C | 1.02 kg/L |
Viscosity brookfield RVT rotor | 30 – 50 cps |
Noxiousity according to CEE 88/379 | No |
Flammability | No |
Temperature of application | +5°C to +35°C |
Re-coatable after at 25°C | 60 minutes |
Tests performed at 25°C, 50% of relative humidity and in absence of ventilation. All values are subject to 5-10 % tolerance |
Surface preparation
The surface must be dry clean, free from grease substances, paints, curing compound or any inconsistent parts, in order to allow the resin to penetrate effectively.
Mixing
Stir the product before use. If used as a Paint primer, dilute with water at a ratio of 1: 1.
Application
PRIMER A18 can be applied with a brush, roll or sprayer.
The product must penetrate in the support and must not remain in excess on surface.
Wait for about 60 minutes before applying the next consecutive coat.
After about 6 hours from applying the product, plastering, ceramic tiles or any other covering can be applied.
If used as anti-dusting agent, PRIMER A18 must be applied in more than one coat, with care to spread it uniformly and in small quantity at a time.
Cleaning
Clean the tools with water when the product is still wet. Dry residues should be removed mechanically or with a solvent.
Recommendations
During application, wear appropriate protective clothing, goggles, gloves and respiratory equipment if necessary.
In case of contact with skin, rinse with water and again wash thoroughly with soap and water. In case of contact with eyes, rinse with plenty of water and seek medical advice accordingly.
If ingested, obtain medical attention immediately. Do not induce vomiting.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.
Synthetic Resin Primer
Latex Modified Cementitious Tile Adhesive