Solvent Free Epoxy Primer
PRIMER POXY FF* is a universal primer for the EPOFINISH and EPOFLOOR product range, its applied on prepared concrete and cementitious substrates to seal the substrate and enhance bonding with top coats. PRIMER POXY FF* is a two component solvent free epoxy resin that has sealing properties making it ideal for concrete substrates.
Packaging:
PRIMER POXY FF* is supplied in 15 Liter kits.
Consumption:
7-10 m² / liter per coat according to the porosity of the surface.
Storage:
Store the product in dry closed place with temperature between +5°C and +35°C. In these conditions, the product maintains its stability for 12 months.
|
Surface Preparation
The surface should be sound, clean, dry and free from loose and flaking materials, efflorescence, laitance, curing compounds, dirt, oil, grease or other contaminants. Mechanical methods like grinding or grit/captive blasting in order to provide a suitable profiled open textured surface is strongly recommended.
New concrete or cementitious surfaces should be at least 28 days old, have moisture content not exceeding 5% and relative humidity of the concrete is 75% or below. Old or existing floor should be refurbished mechanically to ensure clear sound substrate.
Mixing
Mix PRIMER POXY FF* as supplied. Add the entire content of hardener can to the base can and mix thoroughly for about 2 minutes.
Application
Once mixed, the PRIMER POXY FF* shall be immediately applied in a thin continuous film using stiff brushes or rollers. Avoid over-application and puddles. PRIMER POXY FF* shall be allowed to become tack- free prior to the application of epoxy coating (unless otherwise specified) but well within the open time specified for the given temperature.
General Applications
Cleaning
Clean tools with SOLVENTE 10 promptly before material hardens. Cured material must be mechanically removed.
Recommendations
Avoid contact with skin & eyes. Protective clothing such as gloves & safety goggles should be worn during application. Treat any splashes to the skin or eyes with fresh water immediately.
Should the product be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately. Ensure adequate ventilation at site and avoid inhalation of vapors.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.
Solvent Based Epoxy Primer
Fast Cure Solvent-Free Epoxy Primer for Concrete Floors
Penetrating Solvent-Free Epoxy Primer for Concrete Floors
Solvent Free High Performance Epoxy Primer
Water Based Epoxy Primer
High Build Solvent Free Epoxy Flooring System