High Quality Spatter Dash Bond Coating
A cement based premixed product for application on smooth concrete walls and ceiling to work as a rough scratch coat before applying the cement plaster.
DASHBOND SP is made to be applied directly to smooth concrete surfaces without the need to roughen the surface by hacking it.
DASHBOND SP is suitable as a base coat on precast, cement block, and conventional buildings.
Packaging:
DASHBOND SP is supplied in 25kg and 50kg bags.
Consumption:
Up to 20 m2 per 50kg bag depends on the method of application and surface condition.
Storage:
Product should be stored in dry and covered place in unopened bags. In these conditions, product shelf life is 12 months from production date.
|
Surface preparation
Remove dust, loose particles, grease and traces of foreign materials which may affect the adhesion. Moisten the concrete surface or the AAC Block wall with clean water before applying DASHBOND SP. Running water on the surface should be allowed to drain prior to application.
Mixing
Add the content of DAHSBOND SP bag into a container of 10.5-11 Liters of clean water. Mix until a uniform, lump free consisting mix is achieved.
For mixing process, a slow speed drill (200 -300 rpm) fitted with a suitable paddle is recommended. Let the composition stands for nearly 5 minutes and remix again.
Application
Apply the mixture using a suitable spraying unit or with Tyrolean machine manually till you reach the required thickness (2 to 3 mm).
Composition
DASHBOND SP consists of Portland cement, special high strength hydraulic binders, aggregate and special chemical additives to achieve a high strength adhesion with water resistance and crack free coat.
Cleaning
Tools and equipment should be cleaned with water immediately after use. Hardened materials should be mechanically removed.
Recommendations
DASHBOND SP is a cement-based product.
During application, wear appropriate protective clothing, goggles, gloves and respiratory equipment if necessary.
In case of contact with skin, rinse with water and again wash thoroughly with soap and water. In case of contact with eyes, rinse with plenty of water and seek medical advice accordingly.
If ingested, obtain medical attention immediately. Do not induce vomiting.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.
BENTONITE
Spatter Dash Bond Coating
Superior Quality Spatter Dash Bond Coating
Superior Quality Spatter Dash Bond Coating
Normal Block Laying Mortar
High Build Flexible Polyurethane Floor Coating