Protective Bituminous Board
BETOBOARDI is a pre-formed bituminous board modified with a special rigid compound. It is used to protect the waterproofing during backfilling procedures (retaining walls, fixed pavements, cast concrete etc.) and construction traffic.
Packaging:
BETOBOARDI is supplied in sheets
Available in 3mm, 4mm and 6mm.
Dimension:
1m x 2m
Storage:
BETOBOARDI must be stored in a well ventilated, covered storage area away from any source of direct heat. Rolls must be kept in an upright position at all times.
Shelf life:
12 months from the date of production if stored properly in original unopened packing.
|
Application
BETOBOARDI should be applied over the waterproofing system on both the flat and vertical areas by spot binding, lightly torching the material or with a suitable adhesive. It can also be glued using bituminous mastic.
Recommendations
BETOBOARDI have no health hazards when used with our standard application recommendations.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updated on regular basis. It is the user’s responsibility to obtain the latest version.
Cold Applied Bitumen Emulsion
Emulsified Thixotropic Flexible Protective Barrier to Vapor Transmission
Quality Black Bitumen Primer
Flexible, Rubberized Bitumen Emulsion
FLEXIBLE, RUBBERIZED BITUMEN EMULSION
Acrylic Sealant