Superior Quality Spatter Dash Bond Coating
DASHBOND SPX is cement based premixed product for application on smooth concrete walls and ceiling (even if it contains micro-silica) to work as a rough scratch coat before applying the cement plaster.
DASHBOND SPX is made to be applied directly to smooth concrete surfaces without the need to roughen the surface by hacking it.
DASHBOND SPX is suitable as a base coat on precast, cement block, and conventional buildings.
Packaging:
DASHBOND SPX is supplied in 50kg bags.
Consumption:
Up to 20 m2 per 50 Kg / 1.7 mm depending on the method of application and surface condition.
Storage:
Product should be stored in dry and covered place in unopened bags. In these conditions, the product life is 12 months from production date.
|
Surface preparation
Remove dust, loose particles, grease and traces of foreign materials which may affect the adhesion.
Remove all traces of curing compound films and shuttering oil. Do not use paint remover or solvent to clean the surface.
Moisten the concrete surface or the AAC Block wall with clean water before applying DASHBOND SPX. Running water on the surface should be allowed to drain prior to application.
Mixing
Add the content of DAHSBOND SPX bag into a container of 10.5-11 Liter of clean water. Mix until a uniform, lump free consisting mix is achieved.
For mixing process, a slow speed drill (200 -300 rpm) fitted with a suitable paddle is recommended. Let the composition stands for nearly 5 minutes and remix again.
Application
Apply the mixture using a suitable spraying unit or with Tyrolean machine manually till you reach the required thickness (2 - 3 mm).
Curing
The sprayed coat should be cured for a minimum of 2 days by keeping the entire sprayed area wet all day.
Composition
DASHBOND SPX consists of Portland cement, special high strength hydraulic binders, aggregate and special chemical additives to achieve a high strength adhesion with water resistance and crack free coat.
Cleaning
Tools and equipment should be cleaned with water immediately after use.
Recommendations
DASHBOND SPX is a cement-based product. During application, wear appropriate protective clothing, goggles, gloves and respiratory equipment if necessary. In case of contact with skin, rinse with water and again wash thoroughly with soap and water.
In case of contact with eyes, rinse with plenty of water and seek medical advice accordingly. If ingested, obtain medical attention immediately. Do not induce vomiting.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.
BENTONITE
Spatter Dash Bond Coating
High Quality Spatter Dash Bond Coating
Superior Quality Spatter Dash Bond Coating
Normal Block Laying Mortar
Epoxy Bonding Agent