Flexible, Skid-Proof, Watertight Protection Flooring System
EPOFLOOR P2500 is a specially formulated polyurethane-based traffic deck system comprising a primer, waterproof fairing coat and a UV resistant wearing course specifically designed to create a remarkable protection for both new and existing heavily trafficked areas.
Packaging | |||||
PRIMER POXY | 15 Liter pail | ||||
EPOFLOOR E250 | 15 Liter pail | ||||
QUARTZO No. 2 | 25 kg bag | ||||
SOLVENTE 10 | 20 Liter pail |
Consumption | |||||
PRIMER PU | 6-8 m²/Liter depending on surface texture and porosity | ||||
EPOFLOOR E250 | 4-5 m²/Liter | ||||
QUARTZO No. 2 | 4 m²/Liter | ||||
EPOFLOOR UV2 | 0.4 kg/m² |
Storage:
Store the product in dry closed place with temperature between +10ºC to +35ºC. Storage above this temperature may reduce shelf life. In closed containers and in dry environment, the products maintain its stability for 12 months.
|
SYSTEM COMPONENTS | |||||
PRIMER POXY | Solvent based epoxy primer | ||||
EPOFLOOR E250 | High performance epoxy floor coating | ||||
QUARTZO No. 2 | Graded aggregate (0.3-0.9mm) | ||||
EPOFLOOR UV2 | Two component UV stable, wear resistant polyurethane coating |
Substrate preparation
The surface should be sound, clean, dry and free from loose and flaking materials, efflorescence, laitance, curing compounds, dirt, oil, grease or other contaminants. Mechanical methods like grinding or grit/captive blasting in order to provide a suitable profiled open textured surface is strongly recommended.
New concrete or cementitious surfaces should be at least 28 days old and have moisture content not exceeding 5%. Old or existing floor should be refurbished mechanically to ensure clear sound substrate.
Surface irregularities and blow holes shall be repaired with EPOFINISH C, a solvent free epoxy resin repair mortar.
Allow the applied material to harden. After all preparation is complete, ensure dust is removed from the surface using an industrial vacuum.
Application
Priming
In many cases, priming is not required provided that the substrate is sound and non-porous. Substrates that are porous should be primed with PRIMER POXY, a solvent based epoxy primer. Apply the primer to the prepared substrate at a wet film thickness of 100-150 microns. For highly porous substrates, two coats can be applied.
Broadcast QUARTZO No. 2 at a rate of 0.4 to 1.0 kg/m2 while the primer is still wet. Allow the applied product to cure for 16 hours. Remove the excess sand. Remove loose or prominent particle using a trowel then clean the substrate with a vacuum.
Intermediate Coat
Apply EPOFLOOR E250 mixed product on the primed surface with a wet film thickness of 200-250 microns.
Allow the product to cure for 12-16 hours.
UV Top Coat
To provide a UV resistant coating to the system and to enhance durability performance, apply one coat of EPOFLOOR UV2 at a wet film thickness of 140 microns. Allow curing for a period of 24 hours prior to opening for traffic.
Cleaning
Clean tools with SOLVENTE 10 promptly before material hardens. Cured material must be mechanically removed.
Recommendations
Avoid contact with skin & eyes. Protective clothing such as gloves & safety goggles should be worn during application. Treat any splashes to the skin or eyes with fresh water immediately.
Should the product be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately. Ensure adequate ventilation at site and avoid inhalation of vapours.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.
Seamless, Flexible, Polyurethane Flooring System
Seamless, Polyurethane Traffic Deck Coating System
Protective, Polyurethane Based Traffic Deck Coating System
Waterproofing and Protective, Polyurethane Based Traffic Deck Coating System
Waterproofing and Protective, Polyurethane Based Traffic Deck Coating System
Protective, Polyurethane Based Traffic Deck Coating System
Fairing Coat Solvent Free Epoxy Mortar
Solvent Based Epoxy Primer
Thinner / Cleaning Solvent