BENTONITE
ARMONITE is a natural sodium bentonite composed of montmorillonite and volcanic ash. It is a free flowing product with special waterproofing absorbing sealing, molding and bonding properties.
When ARMONITE is added to water and activated by a mixer rotating at high speed, it will produce a high viscosity mix with low permeability and lubrication power.
Packaging
Armonite is supplied in 25 kg bags.
Storage
One year in closed containers stored under moderate temperature (+100C to +400C).
|
Dosage:
The amount of ARMONITE in water depends on the specific requirement of the application.
During application, wear appropriate protective clothing, goggles, gloves and respiratory equipment if necessary.
In case of contact with skin, rinse with water and again wash thoroughly with soap and water. In case of contact with eyes, rinse with plenty of water and seek medical advice accordingly.
If ingested, obtain medical attention immediately. Do not induce vomiting.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.
Spatter Dash Bond Coating
High Quality Spatter Dash Bond Coating
Superior Quality Spatter Dash Bond Coating
Superior Quality Spatter Dash Bond Coating
Normal Block Laying Mortar
Line Marking Coating for Traffic