Seamless, Flexible, Polyurethane Flooring System
EPOFLOOR P1100 is a Polyurethane based flooring system designed to be applied for commercial, semi-industrial and institutional applications. EPOFLOOR P1100 provides high durability and excellent long term comfortable floor coatings system.
PACKAGING | ||
PRIMER PU | 15 liter kit | |
EPOFLOOR P 320 | 15 liter kit | |
EPOFLOOR UV2 | 15 liter kit | |
EPOFLOOR NO. 1 | 25 kg bag | |
SOLVENTE 10 | 20 liter pail |
CONSUMPTION | ||
PRIMER PU | 6-8m²/Liter depending on surface texture and porosity of the surface | |
EPOFLOOR P 320 with QUARTZO NO.1 | 1m²/ 2 Liter at 2mm thickness | |
EPOFLOOR UV2 | 6 m² /Liter at 150 micron DFT | |
QUARTZO NO. 1 | weight ratio of 1 (Quartzo) : 3 (Resin) |
SYSTEM THICKNESS | |
From 1.5 mm – 2.5 mm |
Storage:
Store the product in dry closed place with temperature between +10 ºC to +35ºC. Storage above this temperature may reduce shelf life. If stored as recommended its shelf life would be 12 months from the date of manufacture.
|
EPOFLOOR P1100 SYSTEM COMPONENTS | |||
PRIMER PU | Solvent based epoxy primer | ||
EPOFLOOR P320 | Two component self levelling , solvent free, tough elastic floor coating | ||
QUARTZO No. 1 | Graded aggregate (0-300 micron) | ||
EPOFLOOR UV 2 | Two component U.V. stable, wear resistant Polyurethane coating |
Surface preparation
The surface should be sound, clean, dry and free from loose and flaking materials, efflorescence, laitance, curing compounds, dirt, oil, grease or other contaminants. Mechanical methods like grinding or grit/captive blasting in order to provide a suitable profiled open textured surface is strongly recommended.
New concrete or cementitious surfaces should be at least 28 days old and have moisture content not exceeding 5%. Old or existing floor should be refurbished mechanically to ensure clear sound substrate.
Surface irregularities and blow holes shall be repaired with EPOFINISH C, a solvent free epoxy fairing coat. Allow the repair material to harden.
Expansion joints shall be repaired using EPOMORT HS, a High strength solvent free epoxy mortar.
After all preparation is complete, ensure dust is removed from the surface using an industrial vacuum.
Application
Priming
Apply PRIMER PU, a high performance Polyurethane primer using a suitable roller at the rate of 5-6 m²/Liter depending on the substrate profile and porosity.
The primer should be left to achieve a tack-free condition for 6-8 hours before applying the top coat. If the substrate is excessively porous, a second coat of primer shall be applied again.
Intermediate Coat
EPOFLOOR P320 is supplied in two pre-weighed packs (Component A – Base and Component B – Hardener) which are ready for immediate in-situ use. Stir both components individually before use.
Mix components A and B of EPOFLOOR P320 together for 2 minutes. Add QUARTZO No. 1 at a weight ratio of 1 (Quartzo): 3 (Resin) under constant stirring. Use a slow speed (400 rpm) drill with a spiral mixing head. Work the mixer round the mixing pail to ensure it scrapes the side and bottom of the pail. Pour part of the mixed material into a fresh container and mix for a further 30 seconds.
Pour the mixed material into the primed surface in pools or as large strip. Spread the material evenly to the desired thickness using a notch trowel. Continuous spiking with a spiked roller is to be done. Allow to cure overnight.
Top Coat
EPOFLOOR UV2 is supplied in two pre-weighed packs (Component A – Base and Component B – Hardener) which are ready for immediate in-situ use.
Stir in both components before use. Transfer the entire contents of component B (Hardener) into the component A (Base) can and mix with low speed drill and paddle (200 – 300 rpm) for 2 – 3 minutes till obtaining a mix with uniform consistency. Scrape the sides and bottom of the can during mixing to ensure homogeneity.
To provide a UV resistant coating to the system and to enhance durability performance, apply one coat of EPOFLOOR UV2 at a rate of 6m2 /Liter at 150 micron thickness over smooth surface.
Recommendations
Cleaning
Clean tools with SOLVENTE 10 promptly before material hardens. Cured material must be mechanically removed.
Avoid contact with skin & eyes. Protective clothing such as gloves & safety goggles should be worn during application.
Treat any splashes to the skin or eyes with fresh water immediately. Should the product be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately. Ensure adequate ventilation at site and avoid inhalation of vapors.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.
Seamless, Polyurethane Traffic Deck Coating System
Protective, Polyurethane Based Traffic Deck Coating System
Waterproofing and Protective, Polyurethane Based Traffic Deck Coating System
Waterproofing and Protective, Polyurethane Based Traffic Deck Coating System
POLYURETHANE COATING FOR CONCRETE FLOORS
Pre-mixed Floor Screed
UV Resistant Aliphatic Polyurethane Coating
Thinner / Cleaning Solvent