Single Component Polyurethane UV Resistant Traffic Coating Low VOC
EPOFLOOR P500 is a high solid, single component, alipathic, moisture cure, elastomeric urethane industrial floor coating. Cures to a long lasting, maintenance free, tough but flexible floor coating designed for application in heavily trafficked areas.
Packaging:
EPOFLOOR P500 is available in 4 and 15 Liter kits.
Consumption:
3.0 m2 / Liter coat (anti-slip), 4.0 m2 / Liter/coat (smooth) at 200 microns DFT
Storage:
Keep in tightly closed containers and in sheltered and dry place with a temperature between +5°C and +35°C.
Shelf life:
12 months from date of production if stored properly.
|
Surface Preparation
The surface of the concrete to be prepared shall be sound, clean and uncontaminated.
This preparation shall be such as to leave a sound exposed concrete surface free from dust, loose particles and any deleterious matter. If the concrete surface is defective or has laitance, it must be cut back to a sound base. Excess laitance deposits are best removed by light mechanical scrabbling, grinding or grit/captive blasting followed by vacuum cleaning to remove dust debris.
Any blowholes, chipping or similar surface imperfections shall be repaired using EPOFINISH C, a solvent free epoxy resin repair mortar.
Expansion joints shall be repaired using EPOMORT HS, a high strength solvent free epoxy mortar.
New concrete or cementitious surfaces should be allowed to cure and have moisture content not exceeding 5%. Old or existing floor should be refurbished mechanically to ensure clear sound substrate.
Priming
Highly porous concrete or concrete containing micro-silica must be treated with PRIMER PU, a high performance Polyurethane primer. PRIMER PU shall be used as a primer coat for polyurethane based car park deck systems.
The primer should be applied by brush or roller on to the cleaned surface area (particularly hidden surfaces) at a rate of 5-6 m²/L.
The primer should be left to achieve a tack-free condition for 6-8 hours before applying the top coat. A second coat of primer may be required if the substrate is excessively porous.
While the primer is still wet, broadcast QUARTZO NO.2 at approximately 0.6-2.0 kg/m2. Allow to cure for 24 hours. Excess aggregate shall be brushed away.
Mixing
EPOFLOOR P500 should be stirred with a slow speed drill fitted with a mixing paddle to remove any sediment and to ensure uniformity of color. Avoid any air entrapment in the material while mixing.
Application
Apply EPOFLOOR P500 at a minimum rate of 4.0 m2/Liter for pedestrian traffic and 3.0 m2/Liter for vehicular traffic by roller or airless spray. EPOFLOOR P500 can be applied as a single intermediate coat or as a multi coat sandwich system incorporating aggregates to give a slip resistant finish. Make sure not to exceed the maximum over coating times of the previous coating when applying the product as a top coat or part of a multi coat system. Apply a minimum of two coats.
Cleaning
Tools and equipment should be cleaned with SOLVENTE 10 from Colmef immediately after use. Hardened material should be removed mechanically. Spillages should be absorbed with sand or sawdust and disposed of in accordance with local regulations.
Recommendations
During application, wear appropriate protective clothing, goggles, gloves and respiratory equipment if necessary. In case of contact with skin, rinse with water and again wash thoroughly with soap and water.
In case of contact with eyes, rinse with plenty of water and seek medical advice accordingly. If ingested, obtain medical attention immediately. Do not induce vomiting.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updated on regular basis. It is the user’s responsibility to obtain the latest version.
Seamless, Flexible, Polyurethane Flooring System
Seamless, Polyurethane Traffic Deck Coating System
Protective, Polyurethane Based Traffic Deck Coating System
Waterproofing and Protective, Polyurethane Based Traffic Deck Coating System
Waterproofing and Protective, Polyurethane Based Traffic Deck Coating System
Superior Quality Spatter Dash Bond Coating